"LeNet-5"의 두 판 사이의 차이
둘러보기로 가기
검색하러 가기
Pythagoras0 (토론 | 기여) (→노트: 새 문단) |
Pythagoras0 (토론 | 기여) |
||
(같은 사용자의 중간 판 하나는 보이지 않습니다) | |||
53번째 줄: | 53번째 줄: | ||
===소스=== | ===소스=== | ||
<references /> | <references /> | ||
+ | |||
+ | ==메타데이터== | ||
+ | ===위키데이터=== | ||
+ | * ID : [https://www.wikidata.org/wiki/Q94694243 Q94694243] | ||
+ | ===Spacy 패턴 목록=== | ||
+ | * [{'LEMMA': 'LeNet-5'}] | ||
+ | * [{'LEMMA': 'LeNet'}] |
2021년 2월 17일 (수) 00:28 기준 최신판
노트
- I used the LeNet-5 example here.[1]
- LeNet-5 takes a 32x32 input image (formed by padding the 28x28 image), and I've applied various rotations (degrees) and translations (pixels).[1]
- What are the advantages of LeNet-5 given these results?[1]
- LeNet-5 is a classical neural network architecture that was successfully used on a handwritten digit recognition problem back in 1998.[2]
- In principle, LeNet-5 was the first architecture that introduced the idea of applying several convolution layers before connecting to a fully-connected hidden layer.[2]
- We will use the LeNet network, which is known to work well on digit classification tasks.[3]
- The design of LeNet contains the essence of CNNs that are still used in larger models such as the ones in ImageNet.[3]
- This section explains the lenet_train_test.prototxt model definition that specifies the LeNet model for MNIST handwritten digit classification.[3]
- A new LeNet-5 gas identification convolutional neural network structure for electronic noses is proposed and developed in this paper.[4]
- Inspired by the tremendous achievements made by convolutional neural networks in the field of computer vision, the LeNet-5 was adopted and improved for a 12-sensor array based electronic nose system.[4]
- By adjusting the parameters of the CNN structure, the gas LeNet-5 was improved to recognize the three categories of CO, CHand their mixtures omitting the concentration influences.[4]
- The final gas identification accuracy rate reached 98.67% with the unused data as test set by the improved gas LeNet-5.[4]
- Use PyTorch to build the most classic LeNet convolutional neural network CNN——Jason niu class LeNet(nn.[5]
- The LeNet architecture was first introduced by LeCun et al.[6]
- LeNet is small and easy to understand — yet large enough to provide interesting results.[6]
- Note: The original LeNet architecture used TANH activation functions rather than RELU .[6]
- The LeNet class is defined on Line 10, followed by the build method on Line 12.[6]
- We will wrap it in a class called LeNet.[7]
- So, here we have learned how to develop and train LeNet-5 in Tensorflow 2.0.[7]
- - LeNet-5 is: - trained on MNIST dataset (60000 training examples).[8]
- - LeNet-5 is expected to: - converge after 10–12 epochs.[8]
- Implementation - We will use a simpler version of the LeNet-5 than the one described in the paper.[8]
- Architecture build Following the Figure 2 above, here is LeNet-5 architecture in Keras.[8]
- In the original paper where the LeNet-5 architecture was introduced, subsampling layers were utilized.[9]
- But in our implemented LeNet-5 neural network, we’re utilizing the tf.keras.layers.[9]
- Yann LeCun, Leon Bottou, Yosuha Bengio and Patrick Haffner proposed a neural network architecture for handwritten and machine-printed character recognition in 1990’s which they called LeNet-5.[10]
- The input for LeNet-5 is a 32×32 grayscale image which passes through the first convolutional layer with 6 feature maps or filters having size 5×5 and a stride of one.[10]
- Then the LeNet-5 applies average pooling layer or sub-sampling layer with a filter size 2×2 and a stride of two.[10]
- Then add layers to the neural network as per LeNet-5 architecture discussed earlier.[10]
- LeNet – 5 is a great way to start learning practical approaches of Convolutional Neural Networks and computer vision.[11]
- The LeNet – 5 architecture was introduced by Yann LeCun, Leon Bottou, Yoshua Bengio and Patrick Haffner in 1998.[11]
- In this article, we are going to analyze the LeNet – 5 architecture.[11]
- LeNet-5 is a Multilayer Neural Network and it is trained with backpropagation algorithm.[11]
- LeNet is a convolutional neural network structure proposed by Yann LeCun et al.[12]
- In general, LeNet refers to lenet-5 and is a simple convolutional neural network.[12]
- proposed the original form of LeNet LeCun, Y.; Boser, B.; Denker, J. S.; Henderson, D.; Howard, R. E.; Hubbard, W. & Jackel, L. D. (1989).[12]
- As shown in the figure (input image data with 32*32 pixels) : lenet-5 consists of seven layers.[12]
- LeNet-5, a type of CNN, is being used here.[13]
- I trained the model using LeNet with an additional convolutional layer towards the end.[13]
- To start with CNNs, LeNet-5 would be the best to learn first as it is a simple and basic model architecture.[14]
- LeNet-5 was developed by one of the pioneers of deep learning Yann LeCun in 1998 in his paper ‘Gradient-Based Learning Applied to Document Recognition’.[14]
- LeNet was used in detecting handwritten cheques by banks based on MNIST dataset.[14]
- LeNet-5 introduced convolutional and pooling layers.[14]
- A concrete ex- ample of this is the rst layer of LeNet-5 shown in Figure 2.[15]
- Units in the rst hidden layer of LeNet-5 are organized in 6 planes, each of which is a feature map.[15]
- Figures 25 and 26 show a few examples of success- ful recognitions of multiple characters by the LeNet-5 SDNN.[15]
- In this section, we will introduce LeNet, among the first published CNNs to capture wide attention for its performance on computer vision tasks.[16]
- At the time LeNet achieved outstanding results matching the performance of support vector machines, then a dominant approach in supervised learning.[16]
- LeNet was eventually adapted to recognize digits for processing deposits in ATM machines.[16]
- LeNet’s dense block has three fully-connected layers, with 120, 84, and 10 outputs, respectively.[16]
소스
- ↑ 1.0 1.1 1.2 Understanding the significance of LeNet-5 w/ MNIST data set
- ↑ 2.0 2.1 Hands-On Java Deep Learning for Computer Vision [Book]
- ↑ 3.0 3.1 3.2 LeNet MNIST Tutorial
- ↑ 4.0 4.1 4.2 4.3 Development of a LeNet-5 Gas Identification CNN Structure for Electronic Noses
- ↑ LeNet-5 of PyTorch: Use PyTorch to build the most classic LeNet-5 convolutional neural network CNN
- ↑ 6.0 6.1 6.2 6.3 Convolutional Neural Network in Python
- ↑ 7.0 7.1 LeNet TensorFlow 2.0
- ↑ 8.0 8.1 8.2 8.3 LeNet-5: Summary and Implementation
- ↑ 9.0 9.1 Understanding and Implementing LeNet-5 CNN Architecture (Deep Learning)
- ↑ 10.0 10.1 10.2 10.3 A Classic CNN Architecture
- ↑ 11.0 11.1 11.2 11.3 LeNet-5: A Practical Approach
- ↑ 12.0 12.1 12.2 12.3 Wikipedia
- ↑ 13.0 13.1 vikasnataraja/Traffic-Sign-Classifier-using-Deep-Learning-LeNet-5: This project uses LeNet-5, a type of Convolutional Neural Network, to classify German traffic signs
- ↑ 14.0 14.1 14.2 14.3 Complete Tutorial On LeNet-5 | Guide To Begin With CNNs
- ↑ 15.0 15.1 15.2 Architecture of LeNet-5, a Convolutional Neural Network, here for...
- ↑ 16.0 16.1 16.2 16.3 6.6. Convolutional Neural Networks (LeNet) — Dive into Deep Learning 0.15.1 documentation
메타데이터
위키데이터
- ID : Q94694243
Spacy 패턴 목록
- [{'LEMMA': 'LeNet-5'}]
- [{'LEMMA': 'LeNet'}]