"유효숫자"의 두 판 사이의 차이

수학노트
둘러보기로 가기 검색하러 가기
(→‎메타데이터: 새 문단)
 
99번째 줄: 99번째 줄:
 
  <references />
 
  <references />
  
−
== 메타데이터 ==
+
==메타데이터==
−
 
 
 
===위키데이터===
 
===위키데이터===
 
* ID :  [https://www.wikidata.org/wiki/Q1056761 Q1056761]
 
* ID :  [https://www.wikidata.org/wiki/Q1056761 Q1056761]
 +
===Spacy 패턴 목록===
 +
* [{'LOWER': 'significant'}, {'LEMMA': 'figure'}]
 +
* [{'LEMMA': 'significance'}]
 +
* [{'LOWER': 'significant'}, {'LEMMA': 'digit'}]
 +
* [{'LOWER': 'significant'}, {'LEMMA': 'figure'}]

2021년 2월 17일 (수) 01:29 기준 최신판

노트

  1. Significant figures are any non-zero digits or trapped zeros.[1]
  2. Significant figures of a number are digits which contribute to the precision of that number.[1]
  3. In addition, 120.00 has five significant figures since it has three trailing zeros.[1]
  4. The significance of trailing zeros in a number not containing a decimal point can be ambiguous.[1]
  5. The LEAST number of significant figures in any number of the problem determines the number of significant figures in the answer.[2]
  6. The significant figures (also known as the significant digits or precision) of a number written in positional notation are digits that carry meaningful contributions to its measurement resolution.[3]
  7. Significance arithmetic is a set of approximate rules for roughly maintaining significance throughout a computation.[3]
  8. Zeros to the left of the significant figures (leading zeros) are not significant.[3]
  9. Thus 1.20 and 0.0980 have three significant figures whereas 45,600 may have 3, 4 or 5 significant figures.[3]
  10. Count how many significant figures are in a number, and find which digits are significant.[4]
  11. Let's see if we can learn a thing or two about significant figures, sometimes called significant digits.[5]
  12. Before we go into the depths of it and how you use it with computation, let's just do a bunch of examples of identifying significant figures.[5]
  13. But I think when you look over here, it makes a lot more sense why you only have three significant figures.[5]
  14. The non-zero digits are going to be significant figures.[5]
  15. The method of rounding to a significant figure is often used as it can be applied to any kind of number, regardless of how big or small it is.[6]
  16. When a newspaper reports a lottery winner has won £3 million, this has been rounded to one significant figure.[6]
  17. Not all of the digits have meaning (significance) and, therefore, should not be written down.[7]
  18. Hence a number like 26.38 would have four significant figures and 7.94 would have three.[7]
  19. How will you know how many significant figures are in a number like 200?[7]
  20. In mathematical operations involving significant figures, the answer is reported in such a way that it reflects the reliability of the least precise operation.[7]
  21. Following the rules noted above, we can calculate sig figs by hand or by using the significant figures counter.[8]
  22. Suppose we have the number 0.004562 and want 2 significant figures.[8]
  23. Suppose we want 3,453,528 to 4 significant figures.[8]
  24. many of the following numbers have 4 significant figures?[9]
  25. Only those digits before the exponent are used to express the number of significant figures.[9]
  26. Exact numbers are considered to have an infinite number of significant figures.[9]
  27. By using significant figures, we can show how precise a number is.[10]
  28. With significant figures, the final value should be reported as 1.3 x 102 since 0.46 has only 2 significant figures.[10]
  29. It should be noted that both constants and quantities of real world objects have an infinite number of significant figures.[11]
  30. For example if you were to count three oranges, a real world object, the value three would be considered to have an infinite number of significant figures in this context.[11]
  31. When rounding numbers to a significant digit, keep the amount of significant digits wished to be kept, and replace the other numbers with insignificant zeroes.[11]
  32. When doing calculations for quizzes/tests/midterms/finals, it would be best to not round in the middle of your calculations, and round to the significant digit only at the end of your calculations.[11]
  33. One way is to look at significant figures.[12]
  34. We round a number to three significant figures in the same way that we would round to three decimal places.[12]
  35. If the last significant digit of a number is 0, we include this.[12]
  36. To do my rounding, I have to start with the first significant digit, which is the 7.[13]
  37. We say that 168 has three significant figures (i.e. three digits in the number are known to be correct), but 168.000 has six significant figures.[14]
  38. Non-zero digits always count toward the number of significant figures; zeroes count except where they are only setting the scale.[14]
  39. Almost always you do not know the True Value, and the uncertainties you report (by how many significant figures you write down) are only estimates.[14]
  40. , so I confidently say I weigh 168 lbs (three significant figures).[14]
  41. Scientists express the level of precision by using significant figures.[15]
  42. When working with analytical data it is important to be certain that you are using and reporting the correct number of significant figures.[16]
  43. The number of significant figures is dependent upon the uncertainty of the measurement or process of establishing a given reported value.[16]
  44. In a given number, the figures reported, i.e. significant figures, are those digits that are certain and the first uncertain digit.[16]
  45. However, we know how difficult it is to make trace measurements to 3 significant figures and may be more than a little suspicious.[16]
  46. If your instructor has enabled it, the sigfig icon is displayed beside the answer box for questions that check for significant figures.[17]
  47. The answer format tip indicates that a number must specified to the correct number of significant figures, and might also specify whether units are required.[17]
  48. In many of the problems in these tutorials, you will be asked to report your answer with a specific number of significant figures.[18]
  49. When multiplying or dividing, the number of significant figures in the result is equal to the smallest number of significant figures in one of the operands.[18]
  50. The operand with the smallest number of significant figures is 4.3, so our answer should have 2 significant figures.[18]
  51. The same principle governs the use of significant figures in multiplication and division: the final result can be no more accurate than the least accurate measurement.[19]
  52. Determine the correct number of significant figures.[19]
  53. In some cases the originator of the information can provide an excess of true figures and the number is rounded off to contain only the necessary significant figures.[20]
  54. If there is no indication of the uncertainty, the reader has (no other possibility than) to expect the number to contain only significant figures, the last of which is uncertain.[20]
  55. Round the uncertainty to two significant figures.[20]
  56. Start with rounding the uncertainty to two significant figures, i.e. 33 mg.[20]
  57. Error Analysis and Significant Figures Errors using inadequate data are much less than those using no data at all.[21]
  58. You should only report as many significant figures as are consistent with the estimated error.[21]
  59. The quantity 0.428 m is said to have three significant figures, that is, three digits that make sense in terms of the measurement.[21]
  60. The same measurement in centimeters would be 42.8 cm and still be a three significant figure number.[21]
  61. Significant figures give an idea of the accuracy of a number.[22]
  62. We can use significant figures to show the difference.[22]
  63. Unless you actually see a red hint telling you that the significant figures are incorrect, then the reason for your answer being marked wrong has nothing to do with sig figs.[23]
  64. That number determines how many significant figures there must be in order for the question to be marked correct.[23]
  65. The uncertainty can affect the required number of significant figures in the value.[23]
  66. The uncertainty should be stated with 1 or 2 significant figures.[23]
  67. How would you round a number like 99.99 to three significant figures?[24]
  68. The number of significant figures in the product or quotient of two or more measurements cannot be greater than that of the measurement with the fewest significant figures.[24]
  69. Here, the mantissa of the number to be logged is underlined, showing 3 significant figures.[25]
  70. The same number of significant figures is underlined starting with the decimal point.[25]
  71. Significant figures are a central concept to reporting values in science, but one that is commonly misunderstood.[26]
  72. Reading the value from left to right, the first non-zero digit is the first significant figure.[26]
  73. If the value does not have a decimal point, all digits to the right of the first significant figure to the last non-zero digit are significant.[26]
  74. For example, \( 100 \) could be a value given to \( 1, 2 \mbox{or} 3 \) significant figures.[26]
  75. so we know how many significant figures to round to at the end of the entire calculation.[27]
  76. Our answer from the addition should then only have 4 significant figures.[27]
  77. Since the rules for significant figures for addition and subtraction are the same, our answer here should only have 2 significant figures.[27]
  78. Round the final answer to 2 significant figures to reflect the least amount of significant figures found in the division.[27]
  79. What has been done is round each of 10.65, 185, 0.3048 to one significant figure.[28]
  80. Thus 10.65 is rounded to 10 (the 1 is the significant figure); 185 has been rounded to 200 (the 2 is the significant figure); and 0.3048 has been rounded to 0.3 (the 3 is the significant figure).[28]
  81. To round to a given number of significant figures, first count from the first significant digit to the number required (including zeros).[28]
  82. When a number is rounded, the number of significant figures is known as the precision of the number.[28]
  83. Significant figures are numbers that carry a contribution to a measurement and are useful as a rough method to round a final calculation.[29]
  84. Significant figures estimates should be made at the final step of the calculation.[29]
  85. Significant figures are an important scientific concept in which it is assumed that all significant figures in a number are accurate except for the final digit.[30]
  86. When the museum guide gave the age of the bones as 160,000,005 years old, the age became a number with nine significant figures.[30]
  87. I am concerned when seeing manuscripts written with standard deviations having two or more significant figures.[30]
  88. As shown in the following example, uncertainties with two or more significant figures add additional digits to the average.[30]
  89. Once again using to many significant figures in the answer would be misleading.[31]
  90. So, how many significant figures should be used in your answer?[31]
  91. The difference is 2.5 and this number is the number that limits the number of significant figures the answer can contain.....[31]
  92. •Exact numbers never limit the number of significant figures.[31]
  93. So when you report 4500 people attended the game, you really have three significant figures.[32]
  94. The number of significant figures of a multiplication or division of two or more quantities is equal to the smallest number of significant figures for the quantities involved.[33]
  95. For addition or subtraction, the number of significant figures is determined with the smallest significant figure of all the quantities involved.[33]

소스

  1. ↑ 1.0 1.1 1.2 1.3 Introduction to Chemistry
  2. ↑ Rules for Significant Figures
  3. ↑ 3.0 3.1 3.2 3.3 Significant figures
  4. ↑ Significant Figures Counter
  5. ↑ 5.0 5.1 5.2 5.3 Intro to significant figures (video)
  6. ↑ 6.0 6.1 Rounding to significant figures
  7. ↑ 7.0 7.1 7.2 7.3 Significant Figure Rules
  8. ↑ 8.0 8.1 8.2 Significant Figures Calculator - Sig Fig
  9. ↑ 9.0 9.1 9.2 SIGNIFICANT FIGURE RULES
  10. ↑ 10.0 10.1 Significant Figures and Units
  11. ↑ 11.0 11.1 11.2 11.3 Significant Digits
  12. ↑ 12.0 12.1 12.2 Brush up your maths: Significant figures
  13. ↑ Rounding and Significant Digits
  14. ↑ 14.0 14.1 14.2 14.3 Significant Figures
  15. ↑ Significant Figures
  16. ↑ 16.0 16.1 16.2 16.3 Significant Figures and Uncertainty
  17. ↑ 17.0 17.1 Answering Numerical Questions That Check Significant Figures
  18. ↑ 18.0 18.1 18.2 Significant Figures
  19. ↑ 19.0 19.1 Significant Figures
  20. ↑ 20.0 20.1 20.2 20.3 Significant figures
  21. ↑ 21.0 21.1 21.2 21.3 Error Analysis and Significant Figures
  22. ↑ 22.0 22.1 Significant Figures, Maths First, Institute of Fundamental Sciences, Massey University
  23. ↑ 23.0 23.1 23.2 23.3 Physics 1XX Labs: WebAssign & Significant Figures
  24. ↑ 24.0 24.1 Significant Figures
  25. ↑ 25.0 25.1 CHM 112 Sig Figs for logs
  26. ↑ 26.0 26.1 26.2 26.3 Everything You Need To Know About Significant Figures For Chemistry
  27. ↑ 27.0 27.1 27.2 27.3 Significant Figures
  28. ↑ 28.0 28.1 28.2 28.3 Rounding and estimation
  29. ↑ 29.0 29.1 What Are Significant Figures?
  30. ↑ 30.0 30.1 30.2 30.3 Significant Figures and False Precision
  31. ↑ 31.0 31.1 31.2 31.3 Measurement and SigFigs
  32. ↑ When is a zero significant?
  33. ↑ 33.0 33.1 Significant Digits -- from Wolfram MathWorld

메타데이터

위키데이터

Spacy 패턴 목록

  • [{'LOWER': 'significant'}, {'LEMMA': 'figure'}]
  • [{'LEMMA': 'significance'}]
  • [{'LOWER': 'significant'}, {'LEMMA': 'digit'}]
  • [{'LOWER': 'significant'}, {'LEMMA': 'figure'}]
원본 주소 "https://wiki.mathnt.net/index.php?title=유효숫자&oldid=51408"