Pulsed laser

노트

위키데이터

• ID : Q15928349

말뭉치

1. Lasers offers a wide range of pulsed laser sources with wavelengths from the UV through the IR.
2. a high-power pulsed laser beam is focused inside a vacuum chamber to strike a target of the material that is to be deposited.
3. Thin films of oxides are deposited with atomic layer precision using pulsed laser deposition.
4. In this picture, a high-intensity pulsed laser shoots a rotating white disk of Al(alumina).
5. A Q-switched laser is generally classified as a pulsed laser, as its output is characterized by pulses of energy which occur at a particular pulse repetition frequency.
6. Usually, laser ablation refers to removing material with a pulsed laser, but it is possible to ablate material with a continuous wave laser beam if the laser intensity is high enough.
7. In order to resolve this reticle issue, we are investigating in-situ short-pulsed laser cleaning system.
8. In the core of Pulsedeon’s technology is thin-film coating technique called pulsed laser deposition (PLD).
9. The C14158 is a laser driver board designed to evaluate ultrashort pulse characteristics of Pulsed laser diodes (PLD) that are encapsulated in an SMD package or TO-Can (5.6Φ) package.
10. Excelitas offers a wide variety of single channel and array variants of pulsed laser diodes.
11. This method also offers advantages in tool and mold making, broadening the range of applications of pulsed laser systems.
12. It uses pulsed laser radiation to vaporize materials and to deposit thin films in a vacuum chamber.
13. A mode-locked laser is a pulsed laser that emits a periodic sequence of optical pulses where the pulses are spaced by the cavity round-trip time (the group delay).
14. A 0.7 ns pulsed laser was used, with a 40 kHz pulse repetition frequency, 1064 nm wavelength, and 33 W average power.
15. Pulsed laser diodes (PLDs) are available in the wavelengths 850 nm, 905 nm and 1550 nm.