Linear discriminant analysis

수학노트
Pythagoras0 (토론 | 기여)님의 2020년 12월 23일 (수) 01:47 판 (→‎노트: 새 문단)
(차이) ← 이전 판 | 최신판 (차이) | 다음 판 → (차이)
둘러보기로 가기 검색하러 가기

노트

위키데이터

말뭉치

  1. The plot shows decision boundaries for Linear Discriminant Analysis and Quadratic Discriminant Analysis.[1]
  2. Both LDA and QDA can be derived from simple probabilistic models which model the class conditional distribution of the data \(P(X|y=k)\) for each class \(k\).[1]
  3. LDA¶ LDA is a special case of QDA, where the Gaussians for each class are assumed to share the same covariance matrix: \(\Sigma_k = \Sigma\) for all \(k\).[1]
  4. We can thus interpret LDA as assigning \(x\) to the class whose mean is the closest in terms of Mahalanobis distance, while also accounting for the class prior probabilities.[1]
  5. Linear Discriminant Analysis is a supervised classification technique which takes labels into consideration.[2]
  6. LDA explicitly attempts to model the difference between the classes of data.[3]
  7. LDA works when the measurements made on independent variables for each observation are continuous quantities.[3]
  8. It has been suggested, however, that linear discriminant analysis be used when covariances are equal, and that quadratic discriminant analysis may be used when covariances are not equal.[3]
  9. For instance, the classes may be partitioned, and a standard Fisher discriminant or LDA used to classify each partition.[3]
  10. In this post you will discover the Linear Discriminant Analysis (LDA) algorithm for classification predictive modeling problems.[4]
  11. Linear Discriminant Analysis does address each of these points and is the go-to linear method for multi-class classification problems.[4]
  12. These statistical properties are estimated from your data and plug into the LDA equation to make predictions.[4]
  13. With these assumptions, the LDA model estimates the mean and variance from your data for each class.[4]
  14. See Mathematical formulation of the LDA and QDA classifiers.[5]
  15. Let’s see how LDA can be derived as a supervised classification method.[6]
  16. LDA arises in the case where we assume equal covariance among K classes.[6]
  17. While QDA accommodates more flexible decision boundaries compared to LDA, the number of parameters needed to be estimated also increases faster than that of LDA.[6]
  18. For LDA, (p+1) parameters are needed to construct the discriminant function in (2).[6]
  19. (LDA) is most commonly used as dimensionality reduction technique in the pre-processing step for pattern-classification and machine learning applications.[7]
  20. Both Linear Discriminant Analysis (LDA) and Principal Component Analysis (PCA) are linear transformation techniques that are commonly used for dimensionality reduction.[7]
  21. In practice, instead of reducing the dimensionality via a projection (here: LDA), a good alternative would be a feature selection technique.[7]
  22. It should be mentioned that LDA assumes normal distributed data, features that are statistically independent, and identical covariance matrices for every class.[7]
  23. But Linear Discriminant Analysis fails when the mean of the distributions are shared, as it becomes impossible for LDA to find a new axis that makes both the classes linearly separable.[8]
  24. Linear discriminant analysis (LDA) is used here to reduce the number of features to a more manageable number before the process of classification.[8]
  25. As indicated in Table 1 , some of these classifiers are commonly referred to as GNB and LDA.[9]
  26. Same as preceding classifiers after dimensionality reduction to 64 PCs plus LDA based on the Mahalanobis distance metric.[9]
  27. The ANOVA F-statistic (colored numbers) for each PC time course indicates, which components strongly influence LDA classification in PC space.[9]
  28. At their maxima (~16,000 voxels), the LDA and GNB classifiers based on averaging, PCA, and covariance weighting achieved the highest classification rates (~90% and ~85% respectively).[9]
  29. For classification experiments, high-gamma bandpower features and linear discriminant analysis (LDA) are commonly used due to simplicity and robustness.[10]
  30. However, LDA is inherently static and not suited to account for transient information that is typically present in high-gamma features.[10]
  31. To resolve this issue, we here present an extension of LDA to the time-variant feature space.[10]
  32. We call this method time-variant linear discriminant analysis (TVLDA).[10]
  33. There are two types of LDA technique to deal with classes: class-dependent and class-independent.[11]
  34. Although the LDA technique is considered the most well-used data reduction techniques, it suffers from a number of problems.[11]
  35. In the first problem, LDA fails to find the lower dimensional space if the dimensions are much higher than the number of samples in the data matrix.[11]
  36. In the second problem, the linearity problem, if different classes are non-linearly separable, the LDA cannot discriminate between these classes.[11]
  37. This operator performs linear discriminant analysis (LDA).[12]
  38. LDA is closely related to ANOVA (analysis of variance) and regression analysis, which also attempt to express one dependent variable as a linear combination of other features or measurements.[12]
  39. LDA is also closely related to principal component analysis (PCA) and factor analysis in that both look for linear combinations of variables which best explain the data.[12]
  40. Linear discriminant analysis (LDA) is a type of algorithmic model employed in machine learning in order to classify data.[13]
  41. Intuitively, we might think that LDA is superior to PCA for a multi-class classification task where the class labels are known.[14]
  42. In particular in this post, we have described the basic steps and main concepts to analyze data through the use of Linear Discriminant Analysis (LDA).[14]
  43. Linear Discriminant Analysis was developed as early as 1936 by Ronald A. Fisher.[15]
  44. The linear Discriminant analysis estimates the probability that a new set of inputs belongs to every class.[15]
  45. LDA uses Bayes’ Theorem to estimate the probabilities.[15]
  46. Two dimensionality-reduction techniques that are commonly used for the same purpose as Linear Discriminant Analysis are Logistic Regression and PCA (Principal Components Analysis).[15]
  47. Under LDA we assume that the density for X, given every class k is following a Gaussian distribution.[16]
  48. In LDA, as we mentioned, you simply assume for different k that the covariance matrix is identical.[16]
  49. Example densities for the LDA model are shown below.[16]
  50. Dimensionality reduction plays a significant role in high-dimensional data processing, and Linear Discriminant Analysis (LDA) is a widely used supervised dimensionality reduction approach.[17]
  51. However, a major drawback of LDA is that it is incapable of extracting the local structure information, which is crucial for handling multimodal data.[17]
  52. Linear Discriminant Analysis is the most commonly used dimensionality reduction technique in supervised learning.[18]
  53. The shape and location of a real dataset change when transformed into another space under PCA, whereas, there is no change of shape and location on transformation to different spaces in LDA.[18]
  54. The condition where within -class frequencies are not equal, Linear Discriminant Analysis can assist data easily, their performance ability can be checked on randomly distributed test data.[18]
  55. LDA has been successfully used in various applications, as far as a problem is transformed into a classification problem, this technique can be implemented.[18]
  56. However, though QDA is more flexible for the covariance matrix than LDA, it has more parameters to estimate.[19]
  57. The feature selection and classifier coefficient estimation stages of classifier design were implemented using stepwise feature selection and Fisher's linear discriminant analysis, respectively.[20]
  58. Linear Discriminant Analysis (LDA) is an effective classification method, and it is simple and easy to understand.[21]
  59. LDA predicts by estimating the likelihood of a new set of inputs relating to each class.[21]
  60. There are many variations on the original Linear Discriminant Analysis model which we will cover in future posts.[21]
  61. Quadratic discriminant analysis (QDA) is a variant of LDA that allows for non-linear separation of data.[22]
  62. This post focuses mostly on LDA and explores its use as a classification and visualization technique, both in theory and in practice.[22]
  63. LDA is a classification and dimensionality reduction techniques, which can be interpreted from two perspectives.[22]
  64. The first interpretation is useful for understanding the assumptions of LDA.[22]

소스

  1. 이동: 1.0 1.1 1.2 1.3 1.2. Linear and Quadratic Discriminant Analysis — scikit-learn 0.24.0 documentation
  2. Linear Discriminant Analysis
  3. 이동: 3.0 3.1 3.2 3.3 Linear discriminant analysis
  4. 이동: 4.0 4.1 4.2 4.3 Linear Discriminant Analysis for Machine Learning
  5. sklearn.discriminant_analysis.LinearDiscriminantAnalysis — scikit-learn 0.24.0 documentation
  6. 이동: 6.0 6.1 6.2 6.3 Linear Discriminant Analysis, Explained
  7. 이동: 7.0 7.1 7.2 7.3 Linear Discriminant Analysis
  8. 이동: 8.0 8.1 Linear Discriminant Analysis - GeeksforGeeks
  9. 이동: 9.0 9.1 9.2 9.3 Linear Discriminant Analysis Achieves High Classification Accuracy for the BOLD fMRI Response to Naturalistic Movie Stimuli
  10. 이동: 10.0 10.1 10.2 10.3 Time-Variant Linear Discriminant Analysis Improves Hand Gesture and Finger Movement Decoding for Invasive Brain-Computer Interfaces
  11. 이동: 11.0 11.1 11.2 11.3 Linear discriminant analysis: A detailed tutorial
  12. 이동: 12.0 12.1 12.2 Linear Discriminant Analysis
  13. Linear discriminant analysis
  14. 이동: 14.0 14.1 Using Linear Discriminant Analysis (LDA) for data Explore: Step by Step.
  15. 이동: 15.0 15.1 15.2 15.3 Everything You Need to Know About Linear Discriminant Analysis
  16. 이동: 16.0 16.1 16.2 9.2.2 - Linear Discriminant Analysis
  17. 이동: 17.0 17.1 Adaptive Local Linear Discriminant Analysis
  18. 이동: 18.0 18.1 18.2 18.3 Introduction to Linear Discriminant Analysis in Supervised Learning
  19. Discriminant Analysis
  20. Stepwise linear discriminant analysis in computer-aided diagnosis: the effect of finite sample size
  21. 이동: 21.0 21.1 21.2 Linear Discriminant Analysis
  22. 이동: 22.0 22.1 22.2 22.3 Linear, Quadratic, and Regularized Discriminant Analysis