와이파이 보호 접속
둘러보기로 가기
검색하러 가기
노트
- And WPA2 was considered much more secure than the long-dead WEP security.[1]
- WPA2 was made available in 2004 and all network devices from 2006 and on are required to be WPA2 certified.[2]
- Despite providing more advanced security and encryption protocols, WPA2 still has one major flaw.[2]
- The Wi-Fi Protected Setup feature makes it possible to bypass WPA2, which essentially breaks the security in many cases.[2]
- WPA was first used with the introduction of the Microsoft Windows XP operating system.[2]
- One method of establishing security on your network is to set up WEP, WPA™ or WPA2™ as your wireless security mode.[3]
- WPA2/WPA Mixed Mode is also referred to as PSK2-Mixed for some Linksys routers.[3]
- WPA2 Personal is also referred to as PSK2 for some Linksys routers.[3]
- WPA Personal is also referred to as WPA Pre-Shared Key or PSK Personal for some Linksys routers.[3]
- You can also use WPA or WPA2 with a preshared key, which is a static key that is configured on the security device and the client’s device.[4]
- WPA2 or WPAv2 is the next update to the WPA sceme for providing Wi-Fi network security.[5]
- In addition to this the WPA, Wi-Fi Protected Access scheme also provides optional support for AES-CCMP algorithm.[5]
- The WPA2 scheme for Wi-Fi network security has now superseded the basic WPA or WPAv1 scheme.[5]
- WPA2 implements the mandatory elements of IEEE 802.11i.[5]
- In this mode, Android 10 devices use WPA3 to connect, and devices running Android 9 or lower use WPA2 to connect to the same access point.[6]
- WPA2 is a security standard released by Wi-Fi Alliance in 2004.[7]
- WPA2 provides two operation modes: Personal (PSK) and Enterprise.[7]
- WPA2 Personal uses pre-shared keys (PSK) and is designed for home use.[7]
- WPA also referred to as the draft IEEE 802.11i standard became available in 2003.[8]
- WPA could be implemented through firmware upgrades on wireless network interface cards that were designed for WEP in 1999.[8]
- The WPA protocol implements almost all of the IEEE 802.11i standard.[8]
- The Temporal Key Integrity Protocol (TKIP) was adopted for WPA.[8]
- These choices will include none, WEP, WPA, WPA2-Personal, WPA2-Enterprise and possibly WPA3.[9]
- To improve the functions of WEP, WiFi Protected Access or WPA was created in 2003.[9]
- WPA2 has stronger security and is easier to configure than the prior options.[9]
- The main difference with WPA2 is that it uses the Advanced Encryption Standard (AES) instead of TKIP.[9]
- Wi-Fi Protected Access (WPA) certainly sounds more secure, so that’s a good start.[10]
- WPA, or TKIP, has since been deprecated as well.[10]
- The next installment of the WPA trilogy has been required for new devices since July 1, 2020.[10]
- If it’s an option, choose WPA2 or WPA3.[10]
- No wonder, then, that WPA2 offered no streamlined way to safely onboard these devices to an existing Wi-Fi network.[11]
- (WPA2) are security standards to protect network stations connected to WiFi networks.[12]
- -Fi Protected Access (WPA) was supported in IEEE 802.11i wireless networks and was proposed in 2004.[12]
- The encryption method adopted in WPA is the Temporal Key Integrity Protocol (TKIP).[12]
- -Fi Protected Access II (WPA2) aims for complete compatibility with IEEE802.11i standard that was partially achieved by WPA.[12]
- WPA includes support for remote authentication dial-in user service servers.[13]
- WPA Pre-Shared Key is a variation of WPA designed for home networks.[13]
- Similar to WEP, a static key or passphrase is set, but WPA-PSK uses TKIP.[13]
- You'll see options for using WPA for connecting to a wireless network and when setting up a network for others to connect to.[13]
- Definition - What does Wi-Fi Protected Access (WPA) mean?[14]
- So the WiFi Protected Access standard was developed, or WPA for short.[15]
- The main weakness of WPA was that it was designed to use some of the same vulnerable technologies that WEP used.[15]
- But that’s because WPA was designed so that devices that were made to use WEP could use the more secure WPA with a software update.[15]
- Without getting into too much technical jargon, cyber attackers found a way to bypass WPA2 encryption through WPS.[15]
- WPA is an authentication and key management (AKM) protocol developed by the Wi-Fi alliance.[16]
- A session key in WPA2 is computed from a pre-shared password and some publicly known values.[16]
- WPA2 produces a 384-bit secret key called PTK.[16]
- The Wi-Fi protected setup (WPS) is a feature in WPA2 for a convenient and fool-proof setup for accessing the Wi-Fi network.[16]
- " WPA is a security protocol designed to create secure wireless (Wi-Fi) networks.[17]
- WPA also implements something called the Extensible Authentication Protocol (EAP) for authorizing users.[17]
- Instead of authorizing computers based soley on their MAC address, WPA can use several other methods to verify each computer's identity.[17]
- It was replaced by the original Wi-Fi Protected Access (WPA) in 2003 as an interim solution to the limited protection offered by WEP.[18]
- WPA was replaced in 2004 with more advanced protocols of WPA2.[18]
- Though the threat of a security compromise is small, users should not purchase new equipment which supports only WPA with TKIP.[18]
- When a wireless vendor wants WPA certification, its wireless hardware has to go through a testing process in authorized testing labs.[19]
- The first wireless devices were certified for WPA (version 1) in 2003.[19]
- WPA is the Wi-Fi Alliance’s answer to replace WEP with all its vulnerabilities.[19]
- WPA uses Temporal Key Integrity Protocol (TKIP), which recycled some items from WEP; it still uses the RC4 algorithm.[19]
- WPA (sometimes referred to as the draft IEEE 802.11i standard) became available in 2003.[20]
- The WPA protocol implements much of the IEEE 802.11i standard.[20]
- Specifically, the Temporal Key Integrity Protocol (TKIP) was adopted for WPA.[20]
- WPA also includes a Message Integrity Check, which is designed to prevent an attacker from altering and resending data packets.[20]
- Wi-Fi Protected Access (WPA) is a security standard for users of computing devices equipped with wireless internet connections.[21]
- The enterprise mode, WPA-EAP, uses more stringent 802.1x authentication with the Extensible Authentication Protocol (EAP).[21]
- The personal mode, WPA-PSK, uses preshared keys for simpler implementation and management among consumers and small offices.[21]
- WPA provides strong user authentication based on 802.1x and the Extensible Authentication Protocol (EAP).[21]
- TKIP was designed to be efficient enough to work in older WEP devices by updating their firmware to WPA.[22]
- In addition to TKIP, WPA2 supports the AES-CCMP encryption protocol.[22]
- AES-CCMP requires more computing power than TKIP, and migration from WEP to WPA2 requires new hardware.[22]
- WPA2 is based on the ratified version of the IEEE 802.11i standard.[23]
- This makes it quite different from plain WPA, which was a stop-gap measure based on draft versions of the IEEE 802.11i standard.[23]
- It should be noted that WPA is an interim standard that will be replaced with the IEEE��s 802.11i standard upon its completion.[24]
- Before setting up WPA2 on your network, make sure that all connected devices can support this security protocol.[25]
- You should also check with your internet service provider to see if WPA2 is already elected for your network.[25]
- You will likely see an option for WEP, WPA, and WPA2.[25]
- WPA or Wi-Fi Protected Access, is a Wi-Fi security standard that's intended to replace the older WEP, or Wired Equivalent Privacy.[26]
- WEP was supposed to keep Wi-Fi networks secure but turned out to be very easy to break, so it's been deprecated in favor of WPA.[26]
- Well, one thing she would have read is that one major improvement of WPA over WEP is the length of the encryption keys.[26]
- WPA uses a 256-bit key, where WEP used 64-bit and 128-bit keys.[26]
- WPA stands for Wi-Fi Protected Access.[27]
- The WPA was released in 2003 as an interim standard to answer the immediate need for a more secure protocol.[27]
- Unlike the 64 and 128-bit keys of WEP, WPA keys use 256-bit keys.[27]
- Meanwhile, one of the upgrades provided in WPA was the incorporation of message integrity checks.[27]
소스
- ↑ What is WPA3? And some gotchas to watch out for in this Wi-Fi security upgrade
- ↑ 2.0 2.1 2.2 2.3 What is WPA?
- ↑ 3.0 3.1 3.2 3.3 Setting up WEP, WPA or WPA2 wireless security
- ↑ Wi-Fi Protected Access Overview
- ↑ 5.0 5.1 5.2 5.3 Wi-Fi Security: WEP & WPA / WPA2
- ↑ WPA3 and Wi-Fi Enhanced Open
- ↑ 7.0 7.1 7.2 Wi-Fi Protected Access II (WPA2)
- ↑ 8.0 8.1 8.2 8.3 Wifi protected access (WPA)
- ↑ 9.0 9.1 9.2 9.3 WPA vs WPA2: Which WiFi Security Should You Use?
- ↑ 10.0 10.1 10.2 10.3 WPA Key, WPA2, WPA3, and WEP Key: Wi-Fi Security Explained
- ↑ WiFi Security: WEP, WPA, WPA2 And Their Differences
- ↑ 12.0 12.1 12.2 12.3 WiFi Protected Access (WPA) and WiFi Protected Access 2 (WPA2)
- ↑ 13.0 13.1 13.2 13.3 What Is Wi-Fi Protected Access (WPA)?
- ↑ What is Wi-Fi Protected Access (WPA)?
- ↑ 15.0 15.1 15.2 15.3 WPA security explained: what is Wi-Fi Protected Access?
- ↑ 16.0 16.1 16.2 16.3 Evolution of Wi-Fi Protected Access: Security Challenges
- ↑ 17.0 17.1 17.2 WPA (Wi-Fi Protected Access) Definition
- ↑ 18.0 18.1 18.2 Wi-Fi Alliance
- ↑ 19.0 19.1 19.2 19.3 Wi-Fi Protected Access (WPA)
- ↑ 20.0 20.1 20.2 20.3 Wi-Fi Protected Access
- ↑ 21.0 21.1 21.2 21.3 What is Wi-Fi Protected Access (WPA)?
- ↑ 22.0 22.1 22.2 Definition of WPA
- ↑ 23.0 23.1 Wi-Fi Protected Access 2 (WPA2)
- ↑ What is Wi-Fi Protected Access (WPA)? Webopedia Definition
- ↑ 25.0 25.1 25.2 How to Choose Wife Encryption Settings
- ↑ 26.0 26.1 26.2 26.3 What is Wireless Protected Access (WPA)?
- ↑ 27.0 27.1 27.2 27.3 What is WPA?
메타데이터
위키데이터
- ID : Q272165
Spacy 패턴 목록
- [{'LOWER': 'wi'}, {'OP': '*'}, {'LOWER': 'fi'}, {'LOWER': 'protected'}, {'LEMMA': 'Access'}]
- [{'LEMMA': 'WPA'}]
- [{'LEMMA': 'WPA2'}]